Smart-binder Inspection, Cleaning, Lubrication & Preventative Maintenance

Regular Inspection, Cleaning & Lubrication

 
Regular Inspection, Cleaning & Lubrication

Smart-binder Preventative Maintenance (PM)

 

In addition to regular inspection and lubrication IBIS recommends that certain parts of the Smart-binder are checked and replaced every 3,000 running hours. Typically this preventative maintenance (PM) is required after about one year’s operation (eg 10 hours a day for 300 days).

PM parts are recommended to be held at the customer site in addition to the recommended spare parts kits. PM parts kits may be purchased in advance and shipped together with the Smart-binder: If a part is taken from a PM kit because of an emergency (unplanned) need then this missing part should be replaced asap.

See table below:

Service
Interval
Hrs
PM kit parts for Smart-binder
PM kit for
ISG Glue Gun

(not required for SB-2)
PM kit parts for SB-095 sheet feeder
B0001459
View PDF
Download
3000 hr intervals
B0001460
View PDF
Download
6000 hr intervals
B0001461
View PDF
Download
12000 hr intervals
B0001966
View PDF
Download
24000 hr intervals
19856
Sealing kit for the ECXM glue gun
3000 hr intervals
B0000378
View PDF
Download
3000 hr intervals
B0000379
View PDF
Download
6000 hr intervals
B0000383
View PDF
Download
24000 hr intervals
3000
 
6000
 
9000
 
12000    
 
15000
 
18000
 
21000
 
24000      
   

Refer to IBIS if PM kits are required for other Smart-binder optional modules